"
72 X 18 X 2 Triangle Back Flange Gable Air Exhaust Vent
Why choose a custom louver vent?
Custom means the height and width are sized specifically for your vent opening.
Custom to us means all parts and pieces of the vent are customized to fit your install, even the color.
18 inches tall triangle custom louver vent and 72 inches wide ready for bricking around or even stucco.
The 2 inch depth allows the rear flange to attach to the wall with the full 2 inches of vent sticking out from the gable wall.
Order
Triangle gable air exhaust vents
The 2 inch deep vents have louvers or slats spaced an inch and a half apart for a stronger appearance.
Why use a 2 inch deep vent?
2 inch louvers are a nice beefy look compared to the 1 inch depth.
It almost looks like a 4 inch deep but works nicely in tighter areas.
The vent depth should be chosen based on the available wall depth to enter the attic framing or like this back flange will protrude out from the wall sheeting, the wall cladding is the determining factor.
Another custom vent advantage is the attention to detail as each vent is different.
Most just trim off the end corners and leave them loose.
We use these corners as turn tabs to strengthen.
The corners of the triangle custom vents are locked together for a stiffer nail fin.
The rear flange encompasses the entire vent frame with the bottom including a built in drip pan.
This advantage is for excess condensation and short overhang drippage.
It allows the water particles to be captured before entering the attic and space to safely evaporate without damaging the wood around it.
How important is an aluminum screen on a louvered vent?
This screening protects tremendously with keeping annoying flying insects and crawling bugs out of the attic.
No one wants to go into an attic and get hit in the face with huge spider webs.
Or get chased out by nesting wasps or even a hive of honeybees.
Order 72 X 18 X 2 Triangle vent in this enormous selection of 72 x 18 gable air exhaust vents with a back flange and a 2 inch depth
The angles of the triangle louvered vent means nothing. Please skip this measure and go straight to the base length and center height. This is all you need. 72x18x2trlvbfss
Using screws and a sizable aluminum vent, this can also be manipulated as an entry into the loft.
A home in Adamsville Tennessee 38310 is now properly ventilated with these stucco friendly custom vents
Why use a 2 inch deep vent?
2 inch louvers are a nice beefy look compared to the 1 inch depth.
It almost looks like a 4 inch deep but works nicely in tighter areas.
The vent depth should be chosen based on the available wall depth to enter the attic framing or like this back flange will protrude out from the wall sheeting, the wall cladding is the determining factor.
Another custom vent advantage is the attention to detail as each vent is different.
Most just trim off the end corners and leave them loose.
We use these corners as turn tabs to strengthen.
The corners of the triangle custom vents are locked together for a stiffer nail fin.
The rear flange encompasses the entire vent frame with the bottom including a built in drip pan.
This advantage is for excess condensation and short overhang drippage.
It allows the water particles to be captured before entering the attic and space to safely evaporate without damaging the wood around it.
How important is an aluminum screen on a louvered vent?
This screening protects tremendously with keeping annoying flying insects and crawling bugs out of the attic.
No one wants to go into an attic and get hit in the face with huge spider webs.
Or get chased out by nesting wasps or even a hive of honeybees.
Stronger Triangle Wall Mount Vent
| Vent Size | receive | receive | apx | |||
| if you choose... | order width | order height | vent width | vent height | net free | |
| opening size | 72 | 18 | 71.5 | 17.5 | 269 | |
| tip to tip of vent | 72 | 18 | 72 | 18 | 280 | |
| tip to tip including flange | 72 | 18 | 69 | 15 | 217 |
Depth: 2 inch depth
Colors: All Aluminum Coil
Flange Type: Back Flange
Composite: Metal, Aluminum
Functioning Options: Aluminum, Solid aluminum back, Black aluminum screen on back, Vinyl screen
Using screws and a sizable aluminum vent, this can also be manipulated as an entry into the loft.
A home in Adamsville Tennessee 38310 is now properly ventilated with these stucco friendly custom vents
What else?
901.281.2887 contactus@onyxxteriors.com
No comments:
Post a Comment