"
40 X 40 X 2 Square Front Flange Loft Air Exhaust Vent
Sandstone color from Certain Teed has a soft creamy hue yet still brightens the home's appearance.
When using vinyl siding on a home or even getting a window install with window wraps, the louver vents can be custom made to match.
Shop
Square loft air exhaust vents
2 inch deep vents provide excellent ventilation due to the 1 1/2 inch spacing of the louvers.
There are too many advantages of a custom aluminum louver vent to mention, but we'll try to highlight a few.
2 inch louvers stand strong for wider vents.
The vent"s squareness is held by the louver ends and the rail system aluminum framing.
From the rear, the front flange extending from the face of the vent is visible.
This nail fin or trimming is a full 1 1/2 inch of wall coverage.
The vent wall is tough enough to use for mounting.
Just apply screws through the vent wall behind the louver faces if you want to not damage the face trim and have it as a finish trim.
Turn this custom vent around to the back and see what screen was chosen.
This one has aluminum insect screen.
This is an aluminum screening with less than 1/8 inch holes.
It is so fine of a screen blocking almost no air flow, yet more than strong enough to block insects from entering the attic through the vent.
Shop 40 X 40 X 2 Square vent for the correct 40 x 40 loft air exhaust vents with a front flange and a 2 inch depth
Put any damaged square Fypon vent in it's grave by replacing it with a real aluminum vent for a lifetime of protection. 40x40x2sqlvffss
Louvered functioning vents are a thing of the past. Everyone wants the current thing thing, power vents. Until they discover their thermostats stick, burn out and start fires.
These Certain Teed Sandstone vents are now at home in Richmond Virginia 23231
There are too many advantages of a custom aluminum louver vent to mention, but we'll try to highlight a few.
2 inch louvers stand strong for wider vents.
The vent"s squareness is held by the louver ends and the rail system aluminum framing.
From the rear, the front flange extending from the face of the vent is visible.
This nail fin or trimming is a full 1 1/2 inch of wall coverage.
The vent wall is tough enough to use for mounting.
Just apply screws through the vent wall behind the louver faces if you want to not damage the face trim and have it as a finish trim.
Turn this custom vent around to the back and see what screen was chosen.
This one has aluminum insect screen.
This is an aluminum screening with less than 1/8 inch holes.
It is so fine of a screen blocking almost no air flow, yet more than strong enough to block insects from entering the attic through the vent.
Stronger Right Angle Attic Roof Vent
| Vent Size | receive | receive | apx | |||
| if you choose... | order width | order height | vent width | vent height | net free | |
| opening size | 40 | 40 | 39.5 | 39.5 | 703 | |
| tip to tip of vent | 40 | 40 | 40 | 40 | 722 | |
| tip to tip including flange | 40 | 40 | 37 | 37 | 612 |
Depth: 2 inch vent wall
Finish Color: All Aluminum Coil Colors
Nailer Type: Front Flange
Made Of: .019 Aluminum
Screen Options: Aluminum, Metal back, Vinyl, Aluminum
Louvered functioning vents are a thing of the past. Everyone wants the current thing thing, power vents. Until they discover their thermostats stick, burn out and start fires.
These Certain Teed Sandstone vents are now at home in Richmond Virginia 23231
What else?
901.281.2887 contactus@onyxxteriors.com
No comments:
Post a Comment