146 X 59 X 4 Square No Flange Aluminum Louver Vent

https://onyxxteriors.com/info/explore/146-X-59-X-4-Square-No-Flange-Aluminum-Louver-Vent.php

Yes, our aluminum vents can be customized with any product on this site, and more.

The square corners merged with the center arched trim really gives this vent it's own attitude.

And to top it all off with the tutor style angled trim. Yes.

Bookmark this

Rectangle aluminum louver vents

A gable vent should be functional on a house.

But it can also compliment the home.

131 X 59 X 4 Square No Flange Aluminum Loft Vent

https://onyxxteriors.com/info/explore/131-X-59-X-4-Square-No-Flange-Aluminum-Loft-Vent.php

Specialty custom louver vents are what we do.

This is a series of 30 inch wide rectangular vents connected and trimmed together.

Total of 131 inches wide and 59 inches height.

Choose

Square aluminum loft vents

And made from a baked on white coil for a longer lasting finish.

 

 60 X 12 X 1 Cathedral Front Flange Custom Aluminum Vent

https://onyxxteriors.com/info/explore/60-X-12-X-1-Cathedral-Front-Flange-Custom-Aluminum-Vent.php

Frontal nail fins are very easy for almost any install.

That is why the front flange is refered to as universal.

Look for

Cathedral custom aluminum vents

This Cathedral Louver is 60 wide and 12 tall with a 6 inch leg.

 

Where can you get a triangular louver vent with J channel already attached?

And aluminum to boot.

This J channel was customized on top of the vent for receiving soffit.

And the base is for siding.

Shop for

Triangle aluminum attic vents

Applying any vent can speed up the construction project or hinder it.

By ordering the correct vent, the install should take no longer than 5 minutes.

Being a 1 inch vent the slatted face appears evenly aligned.

With the louver faces 1 inch and the spacing matching.

From the rear, the mounting is obviously flush to the wall substraight.

The vent will be entirely outside the wall for this one.

The fiberglass screen is applied to keep out most flying insects.

 

30 X 30 X 1 Square Back Flange Aluminum Gable Vent

The true beauty of a square vent is the straight lines.

Louvers standing stiff horizontally looking strong.

Even the vent edging aligns for a neat appearance.

Browse for

Square aluminum gable vents

Built on a rail system to ensure a lifetime of stability.

From the side, the nail fin is obviously on the rear of the vent.

These can be used with a multitude of siding applications.

Concrete boards, Hardie Plank, brick and even stucco if fastened to the wall prior.

But if the gable wall is too difficult to work on, these can be mounted from inside the attic.

Just remember to seal the outside from water.

So, why was this vent chosen to not have screen?

The height of the wall and the application was decided that screen wasn't needed.

With a dedicated blower behind the vent, there would be no bugs or birds entering for sure.

The original vent was a Home Depot special.

Nothing wrong with that, except for the durability of the vent.

Using thin, cheap replacement vents is ok for a lot but not this.

The Better Metal Squared Aluminum Attic Vent

Vent Size				receive	receive	apx
if you choose...	order width	order height		vent width	vent height	net free
opening size	30	30		29.5	29.5	378
tip to tip of vent	30	30		30	30	392
tip to tip including flange	30	30		27	27	312

Depth: 1 inch deep

Color Options: Any .019 Aluminum Sheet Metal

Type of Nail Flange: Back Flange

Fabricated With: Aluminum Sheet Metal

Functioning: Aluminum, Vinyl screening on back, Non vented, 1/2 inch wired mesh

Browse for 30 X 30 X 1 Square vents in this vent department of Onyx Xteriors 30 x 30 aluminum gable vents with a back flange and a 1 inch depth

Put any chalked square plastic vent in the grave with a real aluminum vent for a lifetime of beauty. 30x30x1sqlvbfss

Keeping roof rats out of the loft is key. They can chew wires and start a fire.

What else?

Call, text or email us for a personal answer.

901.281.2887 contactus@onyxxteriors.com

 

26 X 26 X 4 Octagon Front Flange Aluminum Vent

Commonality is to see an octagon vinyl vent and see it chewed up by squirrels.

Imagine the squirrel's surprise when they try to take a bite out of an aluminum vent.

We still strongly suggest evicting all 4 legged critters before installing new louvered vents. 😀

Place your order for a Octagonal Louvered Vent right here.

This octagon vent was done in a white PVC coating which will keep the neighbors guessing why rodents don't like your attic. 😋

The top of the flange is mitered to a 22.5 angle to match a true octagon corner.

Shown is a standard 1 1/2 inch nail fin with 1 inch of vent coverage, banding the face trim as 2 1/2 inches.

The side view shows the vent to be 3 1/2 inches deep behind the flange.

This is commonly known as a 4 inch deep vent.

Screened with an aluminum screen.

But 1/2 inch wire mesh can be added for a better critter protection.

And still leaving around 300 square inches of net free air.

Better Metal Octagon Aluminum Gable Vent

Vent Size				receive	receive	apx
if you choose...	order width	order height		vent width	vent height	net free
opening size	26	26		25.5	25.5	309
tip to tip of vent	26	26		26	26	323
tip to tip including flange	26	26		23	23	247

Depth: 3 1/2 inch

Colors: All .019 Aluminum Sheet Metal

Nail Flange Type: Front Flange

Produced With: .019 Aluminum Sheet Metal

Functional Options: Aluminum, Vinyl screen on back, Solid metal back, Half inch wire mesh

See these26 X 26 X 4 Octagon vents for the most durable 26 x 26 aluminum vents with a front flange and a 3 1/2 inch depth

Here we go. A vent formed like a stop sign. Measuring has to be hard, right? No. All we need is the width and height to calculate the rest of the angles. 26x26x4oclvffss

If your home is in good order, let Onyx Xteriors help you keep it that way with optimal venting system components.

What else?

Call, text or email us for a personal answer.

901.281.2887 contactus@onyxxteriors.com

 

51 X 31 X 1 Triangle Front Flange Crawlspace Vent

51 inches width and 31 inches height vent.

This is only the triangular vent.

The flange is then added to the vent and measure.

Start your Triangular Attic Vent right here.

This vent was manufactured in a baked on white finish.

The top of the flange is mitered to a straight point.

For a 1 inch vent, the louvers are spaced 1 inch apart.

The front flange protrudes 1 1/2 inches from the vent for a full nailer.

This can be customized also if the nailer is needed wider or more narrow.

Even the bottom corners are mitered and locked together.

This prevents pulling and separation during install.

And, yes, the entire vent is manufactured with the slats locked on a rail system.

The back was screened with aluminum screen.

The vent is wrapped in low friction plastic to prevent scratches.

This is the minimal for keeping wasps from becoming squatters in the attic.

 

16 inches wide and 42 inches tall with a 36 inch leg.

The side leg of 36 inches is from the base to the beginning of where the arch begins.

Design a Tombstone Attic Louver easily.

For a true half round arch, this one is 16 wide so the leg is half of that less than the total height.

If the leg height is not half of the difference, then it is not true.

Don't worry, it is common both ways.

This tombstone is only 1 inch deep.

It can be mounted inside an opening or outside a wall.

Also known as a slim line vent with it's versatility.

The curvature of the top of the vent adds curb appeal to any gable wall.

The Architectural Bronze color creates a dark glow.

Drawing the eye to look deeper to verify if it is black or brown.

Even crating the curved top vent is detailed.

The vent is wrapped in low friction plastic to prevent scratches.

Then fastened tight into the crate with a thicker plastic to prevent shifting during shipping.

A Better Metal Tombstone Aluminum Crawlspace Vent

Vent Size				receive	receive	apx
if you choose...	order width	order height		vent width	vent height	net free
opening size	16	42		15.5	41.5	253
tip to tip of vent	16	42		16	42	266
tip to tip including flange	16	42		16	42	266

Depth: 1 inch vent wall

Color Coating: Any sheet metal color

Flange Type: No Flange

Formed With: 100% Aluminum

Screen Options: Aluminum, Black vinyl screen on back, Not functional, Wire cloth

Choose 16 X 42 X 1 Tombstone vents in this jumbo variety of 16 x 42 aluminum loft vents with a no flange and a 1 inch depth. Tombstone aluminum loft vent is simply a squared and a curved top. These vent tops often catches every bit of recognition. Measures the Tombstone vent is much quicker than you could imagine. Just forget the top and set your sites to the rectangulared shape of the vent. The horizontal measure, the side measure and the total center height are the only 3 measurements required to obtain these 16 x 42 tombstone no flange vents and make it vent right. 16x42x1tslvnfss

Visualizing, planning and inventing a broad assortment of garret louver intake vents like this one. Attention on modern technology and creativity will always be the company priority.

What else?

Call, text or email us for a personal answer.

901.281.2887 contactus@onyxxteriors.com