35 X 12 X 1 Triangle J Channel Aluminum Attic Vent

http://onyxxteriors.com/info/explore/35-X-12-X-1-Triangle-J-Channel-Aluminum-Attic-Vent.php

Where can you get a triangular louver vent with J channel already attached?

And aluminum to boot.

This J channel was customized on top of the vent for receiving soffit.

And the base is for siding.

Shop for

Triangle aluminum attic vents

Applying any vent can speed up the construction project or hender it.

By ordering the correct vent, the install should take no longer than 5 minutes.

 

30 X 24 X 2 Square Front Flange Attic Exhaust Vent

https://onyxxteriors.com/info/explore/30-X-24-X-2-Square-Front-Flange-Attic-Exhaust-Vent.php

At 30 1/2 x 24 3/4, this custom louver was ordered for an opening size of 31 x 25 1/4.

For opening size, the vent will be reduced 1/4 inch per side.

This ensures the wood framing doesn't hug the vent too tight.

See a

Square attic exhaust vents

When matching a painted house color, it's suggested to order primed white.

It's the easiest finish to paint.

 

17 X 17 X 2 Octagon J Channel Aerated Vent

https://onyxxteriors.com/info/explore/17-X-17-X-2-Octagon-J-Channel-Aerated-Vent.php

Octagonal louver vents are a good break from the standard square and triangle vents.

They bring the eye to focus on the home's beauty more than it's imperfections.

Obtain a

Octagon aerated vents

At 17 x 17 on the vent, the trim measures 20 x 20.

 108 X 78 X 2 Triangle Front Flange Crawlspace Air Vent

https://onyxxteriors.com/info/explore/108-X-78-X-2-Triangle-Front-Flange-Crawlspace-Air-Vent.php

17 pitch triangle attic vent.

Or specifically 17.3 roof pitch by the measures.

108 wide and 78 height.

Procure a

Triangle crawlspace air vents

Made in two pieces since freight doesn't like products this large.

 

76 X 15 X 4 Triangle Back Flange Metal Loft Vent

https://onyxxteriors.com/info/explore/76-X-15-X-4-Triangle-Back-Flange-Metal-Loft-Vent.php

The vent is 76 wide, 15 height and 3.5 inches deep.

The back flange on this triangle was set 1.5 inches back from the face and 2 inches from the back.

Triangle metal loft vents

When a full 3.5 inch vent is needed, but applying stucco, the vent needs to position just right for the stucco depth.

 

50 X 14 X 2 Triangle Front Flange Louvered Metal Vent

https://onyxxteriors.com/info/explore/50-X-14-X-2-Triangle-Front-Flange-Louvered-Metal-Vent.php

Raw Mill is what raw silver aluminum is called in sheet metal.

Raw aluminum cannot be painted as it is.

For painting, it needs a wayne's coat or metal primer first.

The paint will then adhere.

0

Triangle louvered metal vents

Featured here is a 50 x 14 x 2 triangular vent.

This renders a 6.7 roof pitch also referenced as a 7/12 pitch.

Measures are of the base length and center height instead of the pitch.

Using the roof pitch can be off by a few inches depending on the framers cut.

By cutting on one side of the line or the other.

This 7:12 pitch was reduced to 6.7 due to a bad cut.

The true 7 pitch would have been 48 x 14.

 54 X 32 X 2 Triangle Back Flange Aluminum Louvre Vent

https://onyxxteriors.com/info/explore/54-X-32-X-2-Triangle-Back-Flange-Aluminum-Louvre-Vent.php

This rear flanged triangle vent is designed for stucco.

The vent measures 54 at the base and 32 up the center height.

The sharp angle of this vent is because it was set as a 14/12 pitch.

Triangle aluminum louvre vents

Although the longer louvers at the bottom are heavier and span longer than the top, they stand just as straight as all of them.